LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 183 (Supplemental Restraint System -- XE/(760)) >> Supplementary Restraint System (G1823241) >> Removal And Installation >> Passenger Airbag - Project 8 (G2248427) >> Installation

Passenger Airbag - Project 8 (G2248427): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the passenger airbag.
    • Install and tighten the 8 nuts.

    Torque  : 6Nm 

  2. Connect the 4 electrical connectors.
  3. Install the glovebox.

    Refer to: GLOVEBOX

  4. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

  5. Use the Jaguar Land Rover (JLR) approved diagnostic equipment to configure the passenger airbag.

    General Equipment: Jaguar Land Rover approved diagnostic equipment 

scientia non olet · About LEMON Manuals