Section 15 (Complete Engine - 212 Chassis - 4 Of 5)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
- Testing & Repair
- Remove/install right cylinder head
- Tightening procedure for cylinder head bolts
- Tightening procedure for cylinder head bolts - AR01.30-P-5800-01CD
- Tightening procedure for cylinder head bolts - AR01.30-P-5800-01MMA
- Tightening procedure for cylinder head bolts - AR01.30-P-5800-01MMB
- Tightening procedure for cylinder head bolts - AR01.30-P-5800-01SXI
- Tightening procedure for cylinder head bolts - AR01.30-P-5800-07AMG
- Tightening procedure for cylinder head bolts - AR01.30-P-5800-07SX
- Tightening procedure for cylinder head bolts - AR01.30-P-5800-07VA
- Check cylinder head bolts
- Pull out guide rail pins at cylinder head
- Remove/install cylinder head
- Remove/install check valve for chain tensioner to cylinder head - AR01.30-P-5810EL
- Remove/install lower crankcase section at removed engine - AR01.40-P-3200AMG
- Bolt plan for timing case cover
- Remove/install timing case cover
- Remove/install timing case cover - AR01.40-P-8000AMG
- Remove/install timing case cover - AR01.40-P-8000CD
- Remove/install timing case cover - AR01.40-P-8000EL
- Remove/install timing case cover - AR01.40-P-8000ELB
- Remove/install timing case cover - AR01.40-P-8000ELS
- Remove/install timing case cover - AR01.40-P-8000EWS
- Remove/install timing case cover - AR01.40-P-8000SXI
- Replace crankcase - AR01.40-P-8400AMG
- Replace core plugs in crankcase - AR01.40-P-8499HC
- Remove/install end cover - AR01.40-P-8913SXI
- Measure cylinder bores
- Pry off oil pan - AR01.45-P-7500-04MM
- Bolt plan for oil pan