51 - Body Center, Roof, Frame - 911 CARRERA (992) (2 Of 3)

• WM, 51655505 Replacing Front Cross Panel (Front Crash Support)
  • Tools And Materials
  • Installation Position
  • Removing Front Cross Panel (Front Crash Support)
  • Preparing Front Cross Panel (Front Crash Support) For Installation
  • Preparing Connection Areas Of The Body For Installing The Front Cross Panel (Front Crash Support)
  • Installing Front Cross Panel (Front Crash Support)
  • Subsequent Work
    • Subsequent work for body repairs (without straightening system)
• WM, 516555 Replacing Front Cross Panel
  • Notes
  • Preliminary Work For Body Repairs (With Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Preliminary Work
  • Removing Front Cross Panel
    • Removing the front cross panel
  • Preparing Front Cross Panel For Installation
  • Preparing Connection Areas Of The Body For Installing Front Cross Panel
  • Installing Front Cross Panel
  • Subsequent Work
  • Subsequent Work For Body Repairs (With Straightening System)
• WM, 516819 Removing And Installing Dashboard Bracket
  • Notes
  • Installation Position
  • Preliminary Work
  • Removing Dashboard Bracket
  • Installing Dashboard Bracket
  • Subsequent Work
• WM, 517055 Replacing Mounting Saddle For Front Seat
  • Notes
  • Preliminary Work For Body Repairs (Without Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Removing Mounting Saddle For Front Seat
  • Preparing Mounting Saddle For Front Seat For Installation
  • Preparing Connection Areas Of The Body For Installation
  • Installing Mounting Saddle For Front Seat
  • Subsequent Work For Body Repairs (Without Straightening System)
• WM, 51731905 Removing And Installing Rear Tunnel Reinforcement
  • Notes
  • Preliminary Work
  • Removing Rear Tunnel Reinforcement
  • Installing Tunnel Reinforcement
  • Subsequent Work
• WM, 51735501 Replacing FLOORPAN (Complete)
  • Notes
  • Preliminary Work For Body Repairs (Without Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Removing FLOORPAN
  • Preparing FLOORPAN For Installation
  • Preparing Connection Areas Of The Body For Installing The FLOORPAN
  • Installing FLOORPAN
  • Preparing Adapter Plate For Front Floor For Installation
  • Preparing Connection Areas Of The Body For Installing Adapter Plate For Front Floor
  • Preparing Adapter Plate For Inner Door Sill For Installation
  • Preparing Connection Areas Of The Body For Installing Adapter Plate For Inner Door Sill
  • Preparing Adapter Plate For Rear Inner Door Sill For Installation
  • Preparing Connection Areas Of The Body For Installing Adapter Plate For Rear Inner Door Sill
  • Preparing Adapter Plate For Lower Door Sill For Installation
  • Preparing Connection Areas Of The Body For Installing Adapter Plate For Lower Door Sill
  • Installing Adapter Plate For Front Floor
  • Installing Adapter Plate For Inner Door Sill
  • Installing Adapter Plate For Rear Inner Door Sill
  • Installing Adapter Plate For Lower Door Sill
  • Subsequent Work
    • Subsequent work for body repairs (without straightening system)
• WM, 51735511 Replacing (Front) FLOORPAN
  • Notes
  • Preliminary Work For Body Repairs (With Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Removing (Front) FLOORPAN
  • Preparing (Front) FLOORPAN For Installation
  • Preparing Connection Areas Of The Body For Installing The (Front) FLOORPAN
  • Installing FLOORPAN
  • Preparing Front Floor Reinforcement (Additional Component) For Installation
  • Installing Front Floor Reinforcement
  • Preparing Adapter Plate For Inner Side Member For Installation
  • Preparing Connection Areas Of The Body For Installing Adapter Plate For Inner Side Member
  • Installing Adapter Plate For Inner Side Member
  • Subsequent Work For Body Repairs (With Straightening System)
• WM, 51735515 Replacing (Centre) FLOORPAN
  • Notes
  • Preliminary Work For Body Repairs (Without Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Removing (Centre) FLOORPAN
  • Preparing (Centre) FLOORPAN For Installation
  • Preparing Connection Areas Of The Body For Installing The (Centre) FLOORPAN
  • Installing (Centre) FLOORPAN
  • Subsequent Work
    • Subsequent work for body repairs (without straightening system)
• WM, 51735517 Replacing (Rear) FLOORPAN
  • Notes
  • Preliminary Work For Body Repairs (Without Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Preliminary Work
  • Removing FLOORPAN
  • Preparing FLOORPAN For Installation
  • Preparing Connection Areas Of The Body For Installing The FLOORPAN
  • Installing FLOORPAN
  • Subsequent Work
    • Notes
    • Subsequent work for body repairs (without straightening system)
• WM, 518155 Replacing Jacking Point
  • Notes
  • Preliminary Work For Body Repairs (Without Straightening System)
  • Safety Instructions And Information On Quality
    • Safety and quality instructions
  • Tools And Materials
  • Installation Position
  • Removing Front Jacking Point
  • Preparing Front Jacking Point For Installation
  • Preparing Connection Area Of The Body For Installing Front Jacking Point
  • Installing Front Jacking Point
  • Removing Rear Jacking Point
  • Preparing Rear Jacking Point For Installation
  • Preparing Connection Area Of The Body For Installing Rear Jacking Point
  • Installing Rear Jacking Point
  • Subsequent Work For Body Repairs (Without Straightening System)
• WM, 518755 Replacing Seat Cross Member
  • Notes
  • Preliminary Work For Body Repairs (With Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Removing Seat Cross Member
  • Preparing Seat Cross Member For Installation
  • Preparing Adapter Plate For Lower Door Sill For Installation
  • Preparing Adapter Plate For Rear Inner Door Sill For Installation
  • Preparing Connection Areas Of The Body For Installing Adapter Plate For Rear Inner Door Sill
  • Preparing Connection Areas Of The Body For Installing Adapter Plate For Lower Door Sill
  • Preparing Connection Areas Of Body For Installing Seat Cross Member
  • Installing Seat Cross Member
  • Installing Adapter Plate For Rear Inner Door Sill
  • Installing Adapter Plate For Lower Door Sill
  • Subsequent Work For Body Repairs (With Straightening System)
• WM, 518941 Repairing Threaded Bush
  • Notes
  • Preliminary Work
  • Installation Position
  • Installing Repair Threaded Bush
    • Repairing impact absorber mount thread
    • Repairing luggage compartment cross member thread
    • Repairing spring strut mount thread
    • Repairing axle mounting thread
    • Repairing thread on tunnel longitudinal member
    • Repairing thread on tunnel connecting piece
    • Repairing thread on chassis subframe mount
    • Repairing impact absorber thread
• WM, 519219 Removing And Installing Front Cover
  • Notes
  • Preliminary Work
  • Removing Front Cover
  • Installing Front Cover
  • Subsequent Work
• WM, 519319 Removing And Installing Centre Cover
  • Notes
  • Preliminary Work
  • Removing Middle Cover
  • Installing Cover For Centre Underbody
  • Subsequent Work
• WM, 519419 Removing And Installing Rear Cover
  • Notes
  • Preliminary Work
  • Removing Rear Cover
  • Installing Rear Cover
  • Subsequent Work
• WM, 51115515 Replacing Windscreen Frame (Cabriolet)
  • Notes
  • Preliminary Work For Body Repairs (Without Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Removing Windscreen Frame
  • Preparing Windscreen Frame For Installation
  • Preparing Connection Areas Of The Body For Installing The Windscreen Frame
  • Installing Windscreen Frame
  • Subsequent Work For Body Repairs (Without Straightening System)
• WM, 51125515 Replacing A-Pillar (Cabriolet)
  • Notes
  • Preliminary Work For Body Repairs (Without Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Removing A-Pillar (Cabriolet)
  • Preparing A-Pillar (Cabriolet) For Installation
  • Preparing Connection Areas Of Body For Installing A-Pillar (Cabriolet)
  • Installing A-Pillar (Cabriolet)
  • Subsequent Work
    • Subsequent work for body repairs (without straightening system)
• WM, 51135515 Replacing A-Pillar Reinforcement (Cabriolet)
  • Notes
  • Preliminary Work For Body Repairs (With Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Preliminary Work
  • Removing A-Pillar Reinforcement (Cabriolet)
  • Preparing A-Pillar Reinforcement (Cabriolet) For Installation
  • Preparing Connection Areas Of The Body For Installing A-Pillar Reinforcement (Cabriolet)
  • Installing A-Pillar Reinforcement (Cabriolet)
  • Subsequent Work
  • Subsequent Work For Body Repairs (With Straightening System)
• WM, 51375515 Replacing Hinge PILIAR (Cabriolet)
  • Notes
  • Preliminary Work For Body Repairs (With Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Preliminary Work
  • Removing Hinge Pillar (Cabriolet)
  • Preparing Hinge Pillar (Cabriolet) For Installation
  • Preparing Connection Areas Of The Body For Installing The Hinge Pillar (Cabriolet)
  • Installing Hinge Pillar (Cabriolet)
  • Subsequent Work
    • Notes
    • Subsequent work for body repairs (with straightening system)
• WM, 51425517 Replacing B-Pillar (Inner) Reinforcement (Cabriolet)
  • Notes
  • Preliminary Work For Body Repairs (With Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Preliminary Work
  • Removing (Inner) B-Pillar Reinforcement (Cabriolet)
  • Preparing B-Pillar (Inner) Reinforcement (Cabriolet) For Installation
  • Preparing Connection Areas Of The Body For Installing B-Pillar (Inner) Reinforcement (Cabriolet)
  • Installing (Inner) B-Pillar Reinforcement (Cabriolet)
  • Subsequent Work
    • Notes
    • Subsequent work for body repairs (with straightening system)
• WM, 51455515 Replacing Outer Side Member (Cabriolet)
  • Notes
  • Preliminary Work
    • Preliminary work for body repairs (without straightening system)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Removing Outer Side Member (Cabriolet)
  • Preparing Outer Side Member (Cabriolet) For Installation
  • Preparing Connection Areas Of The Body For Installing Outer Side Member (Cabriolet)
  • Installing Outer Side Member (Cabriolet)
  • Subsequent Work
    • Subsequent work for body repairs (without straightening system)
• WM, 51475515 Replacing Inner Side Member (Cabriolet)
  • Notes
  • Preliminary Work For Body Repairs (With Straightening System)
  • Safety And Quality Instructions
  • Tools And Materials
  • Installation Position
  • Preliminary Work
  • Removing Inner Side Member (Cabriolet)
    • Removing inner side member (Cabriolet)
  • Preparing Inner Side Member (Cabriolet) For Installation
  • Preparing Connection Areas Of The Body For Installing Inner Side Member (Cabriolet)
  • Installing Inner Side Member (Cabriolet)
  • Removing Jacking Point
  • Preparing Jacking Point For Installation
  • Preparing Connection Areas Of The Body For Installing Jacking Point
  • Preparing Adapter Plate For Front Inner Side Member For Installation
  • Preparing Connection Areas Of The Body For Installing Adapter Plate For Front Inner Side Member
  • Preparing Adapter Plate For Rear Inner Side Member For Installation
  • Preparing Connection Areas Of The Body For Installing Rear Inner Side Member
  • Preparing Adapter Plate For Lower Inner Side Member For Installation
  • Preparing Connection Areas Of The Body For Installing Adapter Plate For Lower Inner Side Member
  • Installing Jacking Point
  • Installing Adapter Plate For Front Inner Side Member
  • Installing Adapter Plate For Rear Inner Side Member
  • Installing Adapter Plate For Lower Inner Side Member
  • Subsequent Work
    • Notes
    • Subsequent work for body repairs (with straightening system)