Removing FLOORPAN

Measure the length of the welded seam -1- and mark it on the remaining sheetmetal panel.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welded seam
Grind down welded seams -1 and 2-.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welded seams
Grind down welded seams -1 -.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welded seams
Unscrew self-tapping screws -1- .
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws
Remove punch rivets using > VAS 852 001 - Body Dent Removal System. Aluminium and > VAS 6790 - Compact Booster.
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Punch rivets

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Punch rivets
Heat bonding areas using > V.A.G 1416 - Hot-Air Blower.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Bend sheetmetal panels -2- up slightly and remove floorpan -1- by pulling it downwards -arrow- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sheetmetal panels