Preparing Seat Cross Member For Installation

Fit in seat cross member and secure it to the body.
Drill bore holes for blind rivets through both sheet metal panels using > Diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Seat cross member
Drill bore holes for self-tapping screws through the existing holes together with adapter plate using > Diameter 4 mm
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws
Remove seat cross member.
Prepare marked areas ^ for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding area
Prepare marked areas -B- . for a full weld using inert gas.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding area