Removing Dashboard Bracket
Information
The help of another person is required.
- Loosen PDC buzzer holder -1- .
- Unscrew screw -1-
and remove antenna holder with lines connected -2-
.
Antenna holder
- Loosen line bracket with electric wire harness for dashboard.
- 3.1
Loosen line bracket -2-
with electric wire harness for dashboard at the left -1-
.
Electric wire harness for dashboard, left
- 3.2
Loosen line bracket -2-
with electric wire harness for dashboard at the centre -1-
.
Electric wire harness for dashboard, centre
- 3.3
Loosen line bracket -2-
with electric wire harness for dashboard at the right -1-
.
Electric wire harness for dashboard, right
- 3.1
Loosen line bracket -2-
with electric wire harness for dashboard at the left -1-
.
- Unscrew nuts at the left -3-
.
Nuts, left
- Unscrew nuts at the centre -3-
.
Nuts, centre
- Unscrew nuts at the right -3 and 4-.
Nuts, right
- Unclip particle filter cover -1-
.
Particle filter cover
- Unscrew and remove screws -1-
.
screws
- Remove dashboard bracket.