Removing A-Pillar (Cabriolet)

Information 

Only make cuts in the top plate. Make sure not to damage the plate underneath when doing this.

1. Grind down welded seams -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Welded seams

2. Mark and make cut -A-  > Distance 190 mm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Cut

3. Drill out spotwelds.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Spotwelds

4. Heat bonding areas using > V.A.G 1416 - Hot-Air Blower  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding areas

5. Remove A-pillar (Cabriolet).