Removing Middle Cover
Installation position
- Loosen clip connections -1-
.
Loosening clip connections
- 1.1 Turn washers 90° anti-clockwise. -arrow A-
- 1.2 Remove washers. -arrow B-
- Loosen centre cover.
Fastening parts
- 2.1 Unscrew screws -2- .
- 2.2 Unscrew nuts -3- .
- Swivel centre covers down. -arrow A-
Centre cover
- Pull rear centre covers out of the tab -arrow B-
.
Centre cover
- Remove centre cover.