Preparing Front Jacking Point For Installation

Unscrew self-tapping screws -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws
Fit in new front jacking point -1- on body, fit in and fasten.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

New front jacking point
Mark centre points for holes for blind rivets.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holes
Remove front jacking point.
Drill holes for blind rivets at the marks using > Diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holes
Prepare the marked areas for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas