Removing Rear Tunnel Reinforcement

Fig 1: Rear Tunnel Reinforcement Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of crash reinforcement in rear tunnel

1. Loosen holder for coolant pipes.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Loosening holder for coolant pipes

   1. 1.1  Release retaining clip, -arrow A- 
   2. 1.2  Pull off holder for coolant pipes, -arrow B- 
2. Unscrew fastening screws.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Crash reinforcement in rear tunnel

3. Remove tunnel reinforcement.