Section 135 (50 - Body Front - CARRERA (997))
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- WM 5000IN Change Identification Data Plate (All Models)
- WM 5000IN Corrosion Protection Measures During Repairs (All Models)
- WM 5000IN Diagram - Body Gap Dimensions (All Models)
- WM 5000IN Diagram - Keys To Symbols For Welding Work (All Models)
- WM 5000IN Diagram Of Body Bonding Points And Sealing Elements (All Models)
- WM 5000IN Diagram: Plug Plan (All Models)
- WM 5000IN General Information And Notes On Quality (All Models)
- WM 5000IN Processing Structural Body Adhesive (All Models)
- WM 5000AW Safety Notes (All Models)
- WM 5000IN Seam Seals (All Models)
- Accessories
- Unpainted BODYSHELL
- Top Of Front Of Vehicle
- Top Of Front Of Vehicle, Front
- Top Of Front Of Vehicle, (Radiator Tank)
- Front Of Vehicle And Inside A-Pillars
- Side Of Front Of Vehicle
- Top Of Inside Front Of Vehicle And Floor
- Top Of Lower Side Member And Floor
- Wheel Housing And Upper Rear Side Section
- Bottom Of Front Of Vehicle
- Bottom Of Lower Side Member And Floor
- Top Of Rear End
- Bottom Of Rear End
- Side Of Rear End
- Roof
- WM 5000IN Tools And Metalworking Tools For Body Repairs (All Models)
- WM 5000IN UNDERSEALING (All Models)
- WM 5000IN Using 2K Acoustic Filler Foam "AFS-VARIO" On The Body (All Models)
- WM 5000IN Vehicle Identification Number (All Models)
- WM 5000IN Water Drainage Diagram (All Models)
- WM 5000IN Work Sequence For Accident Repair (All Models)
- WM 5000IN Work Sequence For Determining Extent Of Damage To Vehicles Involved In An Accident (All Models)
- WM 501055 Replacing Front Closing Panel (All Models)
- WM 501455 Replacing Front Panel (All Models)
- WM 502055 Replacing Front Floor Panel (All Models)
- Tools
- Technical Values
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs
- Removing Spare-Wheel Well Insert
- Removing Floor Front Section
- Preparing Connection Areas Of The Body For Installing Front Floor Panel
- Installing Front Floor Panel
- Installing Spare-Wheel Well Insert
- Subsequent Work
- WM 505519 Removing And Installing Wing (All Models)
- WM 505619 Removing And Installing Front Wheel Housing Liner (All Models)
- WM 507449 Eliminating Noise Symptoms - Reworking Front Wheel Housing (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, CARR. 4 CABRIO & CARR. 4S CABRIO)
- WM 507455 Replacing Front Wheel Housing (All Models)
- WM 507455 Replacing Front Wheel Housing (Section) (All Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Removing Front Wheel Housing (Section)
- Preparing Connection Areas Of The Body For Installing The Front Wheel Housing (Section)
- Fitting In Front Wheel Housing And Preparing For Installation
- Installing Front Wheel Housing (Section)
- Subsequent Work
- WM 507755 Replacing Outer Front Side Member (All Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Removing Outer Front Side Member
- Preparing Connection Areas Of Body For Installation Of Outer Front Side Member
- Fitting Outer Front Side Member And Preparing For Installation
- Installing Outer Front Side Member
- Subsequent Work
- WM 507955 Replacing Front Side Member (Section) (All Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs Using Straightening Bench
- Preparing Connection Areas Of The Body For Installing The Front Side Members (Section)
- Fitting In Front Side Member And Preparing For Installation
- Installing Front Side Member (Section)
- Subsequent Work
- WM 507955 Replacing Inner Front Side Member (All Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Removing Inner Front Side Member
- Preparing Connection Areas Of Body For Installation Of Inner Front Side Member
- Fitting Inner Front Side Member And Preparing For Installation
- Installing Inner Front Side Member
- SUBSEQUENT Work
- WM 508719 Removing And Installing Cowl Panel Cover (All Models)
- WM 509555 Replacing Body Front Section (All Models)