LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (50 - Body Front - CARRERA (997)) >> WM 502055 Replacing Front Floor Panel (All Models) >> Removing Spare-Wheel Well Insert

Removing Spare-Wheel Well Insert

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Damaged or deformed body parts can impair torsional rigidity, flexional resistance and crash safety. Body parts can no longer be reshaped. Straightening and reshaping is not permitted. If a body part is damaged or deformed, it must be replaced.

Information 

Fastening nuts cannot be used again following removal.

  1. Unscrew fastening nuts -1-  and remove spare-wheel well insert -2-  .
    G09822532Courtesy of PORSCHE CARS NORTH AMERICA, INC.