Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Spray the cut edge with cavity preservation.
- Position masking panel -2-
on the wing -3-
.
- Press in plastic expansion rivet -1- and secure with the pin.
- Install front door. → 575119 REMOVING AND INSTALLING DOOR - section on "Installing"