LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (50 - Body Front - CARRERA (997)) >> WM 505519 Removing And Installing Wing (All Models) >> Installing Wing >> Installing Retaining Strip

Installing Retaining Strip

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
G09822572Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Clip fastening nuts -16-  into place. Fix retaining strip -15-  on the wing up against the stop and tighten with the fastening nuts -14-  . Tightening torque → Tightening torque: 2.0 ft. lb. 
    G09822573Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals