LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (50 - Body Front - CARRERA (997)) >> WM 5000IN General Information And Notes On Quality (All Models) >> Electronic Control Modules >> Replacing Control Modules

Replacing Control Modules

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The replacement of electronic control modules after an accident is necessary if at least one of the following conditions is met:

The housing is noticeably deformed or damaged.

The supporting surface or bracket is deformed (the unit shows no external damage).

The plug connection is damaged or corroded by moisture.

Functional checks or self-diagnosis of the unit reveals the fault "Control module faulty".

scientia non olet · About LEMON Manuals