LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (50 - Body Front - CARRERA (997)) >> WM 505519 Removing And Installing Wing (All Models) >> Removing Wing >> Releasing Wing From A-Pillar

Releasing Wing From A-Pillar

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
G09822558Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew fastening screws -18-  at A-pillar and pull wing out -19-  downwards -C-  and forwards -D-  .
    G09822559Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Check fastening nut -20-  , replacing if necessary.
  3. Remove switching element for filler flap. → 553819 REMOVING AND INSTALLING SWITCHING ELEMENT FOR FILLER FLAP - chapter on "Removing"
scientia non olet · About LEMON Manuals