LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (50 - Body Front - CARRERA (997)) >> WM 505519 Removing And Installing Wing (All Models) >> Removing Wing >> Removing Fuel Tank Cap

Removing Fuel Tank Cap

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wing Component Location
G09822546Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

  1. Press out plastic pin in center of rivet head -1-  and remove fuel tank cap -2-  . Then unclip rubber stop -3-  and rubber sleeve -4-  .
    G09822547Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals