Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws at top flange Flansch | Tightening torque | 3.5 ft. lb. | |||
| Fastening screws M6 on A-piller | Tightening torque | 7.0 ft. lb. | |||
| Fastening nut M6 on wing strut | Tightening torque | 7.0 ft. lb. | |||
| Fastening screw on retaining strip | Tightening torque | 2.0 ft. lb. | |||
| Fastening screw M6 x 20 on tank filler neck | Tightening torque | 7.5 ft. lb. |