LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (50 - Body Front - CARRERA (997)) >> WM 505519 Removing And Installing Wing (All Models) >> Installing Wing >> Fastening Wing To A-Pillar

Fastening Wing To A-Pillar

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
G09822564Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Install switching element for filler flap. → 553819 REMOVING AND INSTALLING SWITCHING ELEMENT FOR FILLER FLAP - chapter on "Installing"
  2. Press in fastening nut -20-  .
    G09822565Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Position wing -19-  on the body -C-  and slide towards A-pillar -D-  . Screw in fastening screws -18-  into the A-pillar and tighten lightly.
scientia non olet · About LEMON Manuals