Preliminary Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery. → WM 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY (CARR. COUPE, CARR. S COUPE, "SPORT CLASSIC", CARR. CABRIO, CARR. S CABRIO, CARR. 4 COUPE, TURBO COUPE, CARR. 4S COUPE, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, GT3, GT2, GT3 RS)
- Remove wheel. → 440519 REMOVING AND INSTALLING WHEEL - section on "Removing"
- Remove front wheel housing liner. → 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER - section on "Removing"
- Remove the front apron. → 631519 REMOVING AND INSTALLING FRONT APRON - section on "Removing"
- Remove headlight. → 941519 REMOVING AND INSTALLING HEADLIGHTS - section on "Removing"
- Remove headlight mounting. → 941419 REMOVING AND INSTALLING HEADLIGHT MOUNTING - section on "Removing"
- Remove airbag sensor. → 695119 REMOVING AND INSTALLING AIRBAG SENSOR
- section on "Removing"
Information
Only when removing the right wing.
- Remove filler flap. → 553719 REMOVING AND INSTALLING FILLER FLAP
- section on "Removing"
Information
Only when removing the right wing.
- Remove carbon canister. → WM 202519 REMOVING AND INSTALLING CARBON CANISTER (ALL MODELS)
Information
Only when removing the left wing.
- Remove reservoir for windscreen washer system. → 926019 REMOVING AND INSTALLING RESERVOIR FOR WINDSCREEN WASHER SYSTEM - section on "Removing"