Fastening Top Of Wing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw in fastening screws -13- on top flange and tighten lightly.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Adjust the contour and gap dimensions relative to the front door and front lid. → WM 5000IN DIAGRAM - BODY GAP DIMENSIONS (ALL MODELS)
Tighten fastening screws -13- with specified tightening torque → Tightening torque: 3.5 ft. lb. .
Tighten fastening screws M6 -18- with tightening torque → Tightening torque: 7.0 ft. lb. .