64 - Glazing, Window Control -- CARRERA (997)

• WM 6400IN General Information On Installing And Removing Car Windows (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS)
  • Tools
  • Removing Glass With Cutting Wire Separator
    • Danger Of Injury When Working On Vehicle Windows
    • Material Damage When Removing The Glass From Car Windows
    • Removing Glass With Cutting Device - Wire Separator
    • Applying Protective Film To The Dashboard
    • Guiding Cutting Thread Into The Passenger Compartment
    • Guiding Cutting Thread Into The Gap In The Glass
    • Attaching Cutting Thread To The Body
    • Attaching Cutting Thread To The Spooling Device
    • Installing Spooling Device And Deflection Rollers On The Glass
    • Separating Glass As Far As P1
    • Repositioning Spooling Device
    • Separating Glass As Far As P2
    • Separating Glass As Far As P3
    • Separating Glass As Far As P4
    • Separating Glass As Far As P5
    • Cutting Power When Removing Glass With Cutting Thread
• WM 641219 Removing And Installing Windscreen (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Tools
  • Preliminary Work
  • General Warning Notes
  • Tools And Materials
  • Removing Windscreen
    • Removing Spacer Blocks
    • Removing Windscreen
  • Preparing Window Aperture For Installation
    • Removing Adhesive From The Body
  • Preparing Windscreen For Installation
    • Removing Windscreen Seal
    • Removing Adhesive From The Windscreen
    • Fitting Windscreen Seal
    • Marking The Bonding Area
    • Activating The Bonding Section Of The Windscreen
    • Priming The Windscreen
  • Installing Windscreen
    • Preliminary Work Before Windscreen Installation
    • Fitting Windscreen Into The Body
    • Preparing 2-Component Adhesive For Processing
    • Applying Adhesive To The Windscreen
    • Pulling Off Protective Film
    • Inserting Windscreen Into The Body
    • Cleaning Fields Of Vision
  • Subsequent Work
• WM 6412IN Processing Of PORSCHE 2-Component Window Bonding Agents WM 641219 Removing And Installing Windscreen (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Pre-Treatment Of Bonding Surfaces
    • Pre-Treating Adhesive Flanges On Vehicle Windows
    • Pre-Treating Bonded Flanges On The Vehicle Body
  • Handling Processing Device
    • Double Cartridge Press
• WM 641623 Installing Seal For Windscreen WM 641219 Removing And Installing Windscreen (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Installing Seal For Windscreen
    • Fitting Seal For Windscreen
• WM 642119 Removing And Installing Closing Aid (911 TARGA 4, 911 TARGA 4S)
  • Technical Values
  • Preliminary Work
    • Preliminary Work For Closing Aid
  • Removing Closing Aid
  • Installing Closing Aid
  • Subsequent Work
    • Subsequent Work For Closing Aid
• WM 643719 Removing And Installing Microswitch For Window Opening Controls (Except 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Technical Values
  • Preliminary Work
  • Removing Microswitch For Window Opening Controls
    • Unclipping Electric Wire For Micro Switches
    • Removing Microswitch For Window Opening Controls
  • Installing Microswitch For Window Opening Controls
    • Notes
    • Clipping In The Electric Wire For Micro Switches
  • Subsequent Work
• WM 644015 Adjusting Front Door Window (Except 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS 4.0)
  • Tools
  • Technical Values
  • Preliminary Work
  • Adjusting Front Door Window
  • Subsequent Work
• WM 644019 Removing And Installing Front Door Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Technical Values
  • Preliminary Work
  • Removing Front Door Window
  • Installing Front Door Window
    • Notes
    • Securing Front Door Window
    • Inserting Door Trim Panel
    • Standardizing The Power Windows
    • Blockage Detection Function
    • Precondition For Operation Of The Power Windows
  • Subsequent Work
• WM 644049 Reworking (Coating) Front Door Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • General Warning Notes
    • Warning Note On Hydrophobic Window
    • Checking Front Door Window
  • Preliminary Work
    • Preparing Components For Processing
    • Cleaning Window Surfaces
    • Reworking (Coating) Front Door Window
• WM 644819 Removing And Installing The Front Window Shaft Seal (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Removing The Front Window Shaft Seal
  • Installing The Front Window Shaft Seal
• WM 645219 Removing And Installing Front Power Windows (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Technical Values
  • Preliminary Work
  • Removing Front Power Windows
  • Installing Front Power Windows
    • Adjusting The Lower Stop Of The Power Window Unit
    • Installing Front Power Windows
  • Subsequent Work
• WM 645419 Removing And Installing Power Window Motor (All Models)
  • Tools
  • Technical Values
  • Preliminary Work
    • Preliminary Work For Power Window Motor
  • Removing Power Window Motor
  • Installing Power Window Motor
  • Subsequent Work
    • Subsequent Work For Window Power Motor
  • Programming Power Window Motor (Door Control Unit)
    • Reading From And Writing To The Power Windows Motor (Door Control Unit)
  • Coding Power Window Motor (Door Control Unit)
    • Coding The Power Windows Motor (Door Control Unit)
• WM 645819 Removing And Installing Switch For Power Windows (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Preliminary Work
  • Removing Switch For Power Windows
  • Installing Switch For Power Windows
  • Subsequent Work
• WM 646119 Removing And Installing Rear Power Window Motor (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Speedster)
  • Technical Values
  • Preliminary Work
  • Removing Rear Power Window Motor
  • Installing Rear Power Window Motor
  • Subsequent Work
• WM 647119 Removing And Installing Rear Window Lifter (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO)
  • Tools
  • Technical Values
  • Preliminary Work
  • Removing Rear Window Lifter
    • Loosening Hydraulic Cylinder
    • Removing Rear Window Lifter
  • Installing Rear Window Lifter
    • Notes
    • Installing Hydraulic Cylinder
  • Adjusting Rear Power Windows Mechanism
  • Additional Instructions For Adjusting Or Replacing The Rear Window Lifter
  • Subsequent Work
• WM 647119 Removing And Installing Rear Power Windows Mechanism (911 Speedster)
  • Tools
  • Technical Values
  • Preliminary Work
  • Removing Rear Power Windows Mechanism
  • Installing Rear Power Windows Mechanism
  • Adjusting Rear Power Windows Mechanism
  • Additional Instructions For Adjusting Or Replacing The Rear Power Windows Mechanism
    • Additional Instructions For Adjusting Or Replacing The Rear Window Lifter
  • Subsequent Work
• WM 647519 Removing And Installing Rear Side Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 TARGA 4, 911 TARGA 4S, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Technical Values
  • Preliminary Work
  • Removing Rear Side Window
    • Removing Side Window
  • Installing Rear Side Window
    • Installing Side Window
  • Subsequent Work
• WM 647619 Removing And Installing Side Window Seal (911 CARR. Coupe, 911 CARR. S Coupe, 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS)
  • Preliminary Work
  • Removing Side Window Seal
    • Notes
    • Loosening Sound Absorber
    • Removing Seal For Roof Frame
  • Installing Side Window Seal
    • Installing Seal For Roof Frame
    • Securing Sound Absorber
    • Installing Side Window Seal
  • Subsequent Work
• WM 647619 Removing And Installing Inner Side-Window Seal (911 TARGA 4, 911 TARGA 4S)
  • Preliminary Work
  • Removing Inner Side-Window Seal
  • Installing Inner Side-Window Seal
  • Subsequent Work
• WM 647619 Removing And Installing Outer Side-Window Seal (Upper Part) (911 TARGA 4, 911 TARGA 4S)
  • Preliminary Work
  • Subsequent Work
• WM 647619 Removing And Installing Outer Side-Window Seal (Lower Part) (911 TARGA 4, 911 TARGA 4S)
  • Preliminary Work
  • Subsequent Work
• WM 648601 Checking Function Of Heated Rear Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Tools
  • Checking Function Of Heated Rear Window
    • Check With The Temperature Probe
• WM 648615 Adjusting Rear Window Cover (911 TARGA 4, 911 TARGA 4S)
  • Tools
  • Technical Values
  • Adjusting Rear Window Cover
• WM 648619 Removing And Installing Rear Window Cover (911 TARGA 4, 911 TARGA 4S)
  • Technical Values
  • Preliminary Work
  • Removing Rear Window Cover
  • Installing Rear Window Cover
  • Subsequent Work
• WM 648619 Removing And Installing Rear Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 TARGA 4, 911 TARGA 4S, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Tools
  • Preliminary Work
  • General Warning Notes
  • Tools And Materials
  • Removing Rear Window
    • Overview
    • Preparing The Rear Window (Hardtop) For Removal
    • Removing Rear Window
  • Preparing Window Aperture For Installation
    • Removing Adhesive From The Body
    • Cleaning And Priming Paint Damage Or Newly Built-Up Paint Areas In The Window Aperture Of The Body
    • Removing Adhesive On The Hardtop Body
    • Cleaning And Priming Paint Damage Or Newly Built-Up Paint Areas In The Window Aperture Of The Hardtop Body
  • Preparing Rear Window For Installation
    • Removing Seal For Rear Window
    • Removing Adhesive From The Rear Window
    • Fitting Seal For Rear Window
    • Applying Activator To The Bonding Section Of The Rear Window
    • Fitting Cover Section
  • Installing Rear Window
    • Aligning Rear Window
    • Preparing 2-Component Adhesive For Processing
    • Applying Adhesive On The Rear Window
    • Pulling Off Protective Film
    • Inserting Rear Window Into The Body
    • Cleaning Fields Of Vision
    • Inserting Rear Window Into The Hardtop Body
    • Completing The Rear Window (Hardtop) After Installation
  • Subsequent Work
  • Technical Values
• WM 649023 Installing Seal For Rear Window (911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
  • Installing Seal For Rear Window
    • Fitting Seal For Rear Window
• WM 649519 Removing And Installing Rear Pneumatic Spring (911 TARGA 4, 911 TARGA 4S)
  • Removing Rear Pneumatic Spring
    • Removing Rear Gas Spring At The Lid
    • Removing Rear Gas Spring At The Body
  • Installing Rear Pneumatic Spring
    • Installing Rear Gas Spring At The Body
    • Installing Rear Gas Spring At The Lid
  • Checking Rear Gas Spring
    • Checking Operation Of Rear Gas Springs