LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> 64 - Glazing, Window Control -- CARRERA (997) >> WM 644015 Adjusting Front Door Window (Except 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Speedster, 911 Gt3 RS 4.0) >> Technical Values

Technical Values

Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screw on front mounting piece (door window lifter)   Tightening torque 8.5 Nm (6 ftlb.) +/-1.5 Nm (+/- 1 ftlb.)  
Fastening screw on rear mounting piece (door window lifter)   Tightening torque 8.5 Nm (6 ftlb.) +/-1.5 Nm (+/- 1 ftlb.)  
Window lifter to inner edge of door   Adjustment value 45 mm +/-1 mm  
Fastening nut securing bottom of window lifter to door   Tightening torque 10 Nm (7.5 ftlb.)    
Roof frame seal to front door window   Control dimension 4.5 mm +1.5 mm  
Roof frame seal to rear door window glass   Control dimension (Coupe) 5 mm +1.5 mm  
Roof frame seal to rear door window glass   Control dimension (Targa) 4 mm +1.5 mm  
Door seal to rear door window glass   Control dimension 0 mm +2 mm