LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> 64 - Glazing, Window Control -- CARRERA (997) >> WM 644819 Removing And Installing The Front Window Shaft Seal (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing The Front Window Shaft Seal

Removing The Front Window Shaft Seal

Fig 1: Identifying Position Of Front Window Shaft Seal
G09826580Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Open the front door window -1-  fully.
    Fig 2: Opening Front Door Window
    G09826581Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Pull front window shaft seal -1-  - beginning at the rear end -arrow A-  - off the sheetmetal door flange -2-  in an upward direction -arrow B-  .
    Fig 3: Removing Front Window Shaft Seal
    G09826582Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Remove the front window shaft seal -1-  .