| Cover for rear sliding roof to rear window cover |
|
Gap dimension A |
15 mm |
+/-2 mm |
|
| Rear center panel to rear window cover |
|
Gap dimension A |
6 mm |
+/-1 mm |
|
| Rear center panel to rear window cover |
|
Gap dimension B |
2 mm |
+/-1 mm |
|
| Fastening screws securing rear window cover to hinge |
|
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Fastening nuts securing sheetmetal bracket to hinge |
|
Tightening torque |
4 Nm (3.0 ftlb.) |
|
|
| Handle strip of rear window cover to rear center panel |
Rear window cover only lowered (max. 3 mm) |
Gap dimension |
6 mm |
+/-1 mm |
|