Section 72 (Air Intake, Turbocharging - 212 Chassis - 1 Of 2)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
- General Information
- Basic Knowledge
- Testing & Repair
- Remove/install air filter housing
- Remove/install engine intake air duct downstream of air filter
- Remove/install air duct housing - AR09.20-P-0080EW
- Torque diagram for intake manifold fastening system - AR09.20-P-1310-03AMG
- Remove/install intake manifold - AR09.20-P-1310ELB
- Detach/attach connecting flange on intake manifold - AR09.20-P-1311AMG
- Remove/install intake port shutoff actuator motor - AR09.20-P-1313CD
- Remove/install inlet port shutoff - AR09.20-P-1314CO
- Remove/install mixing chamber
- Remove/install resonance intake manifold
- Remove/install the tumble flap and resonance flap switchover valve at the intake manifold - AR09.20-P-1990EW
- Remove/install the tumble flap position sensor at intake manifold - AR09.20-P-1995EW
- Remove/install aneroid capsule for boost pressure control flap - AR09.40-P-1002-01CD
- Remove/install aneroid capsule for exhaust gas turbocharger bypass flap - AR09.40-P-1002-02CD
- Remove/install aneroid capsule for wastegate valve - AR09.40-P-1002-03CD
- Remove/install aneroid capsules on turbocharger - AR09.40-P-1002CD
- Remove/install pressure transducer for boost pressure aneroid capsule - AR09.40-P-1003CD
- Remove/install switchover valve for bypass flap aneroid capsule - AR09.40-P-1004CD
- Remove/install pressure transducer for wastegate aneroid capsule - AR09.40-P-1005CD
- Remove, install charge air bypass flap - AR09.40-P-1008CD
- Test turbocharger vacuum unit - AR09.40-P-5915CD
- Torque diagram of exhaust manifold - AR09.40-P-6020-11CD
- Remove/install turbocharger
- Remove/install oil return flow line of turbocharger - AR09.40-P-6021CD
- Remove/install oil feed line for turbocharger - AR09.40-P-6022CD
- Remove/install oil supply connection fitting of turbocharger - AR09.40-P-6023SXI
- Replace seal between turbocharger and exhaust collector - AR09.40-P-6024-15A
- Remove/install turbocharger with exhaust manifold