Section 15 (15 Engine - Cylinder Head, Valve Drive 3.0L (Eng Code MDK.KA) -- 992 - 911 CARRERA (992))

• WM, 150520 Removing And Installing Camshafts (Includes Setting Timing)
  • Tools
  • Technical Values
  • Preliminary Work
  • Removing Camshafts
  • Installing Camshafts
    • Component Markings And Distinguishing Features
  • Installing Camshafts And Setting Timing - Cylinders 4-6
  • Installing Camshafts, Setting Timing - Cylinder Bank 1 -3
  • Subsequent Work
• WM, 153619 Removing And Installing Chain TENSIONER
  • Technical Values
  • Preliminary Work
    • Preliminary Work For Chain Tensioner For Cylinder Bank 1 -3
    • Preliminary Work For Chain Tensioner For Cylinder Bank 4-6
  • Removing Chain TENSIONER
    • Removing Chain Tensioner - Cylinder Bank 1 -3
  • Removing Chain TENSIONER - Cylinder Bank 4-6
  • Installing Chain TENSIONER
    • Installing Chain Tensioner - Cylinder Bank 1 -3
  • Installing Chain TENSIONER - Cylinder Bank 4-6
  • Subsequent Work
    • Subsequent Work For Chain Tensioner For Cylinder Bank 1 -3
    • Subsequent Work For Chain Tensioner For Cylinder Bank 4-6
• WM, 153919 Removing And Installing Actuator For Camshaft Control
  • Technical Values
  • Preliminary Work
    • Preliminary Work For Intake Camshaft
  • Removing Actuator For Camshaft Control
  • Installing Actuator For Camshaft Control
  • Subsequent Work
• WM, 155519 Removing And Installing Hydraulic Valve For Valve Lift Adjustment
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Hydraulic Valve For Valve Lift Adjustment
  • Installing Hydraulic Valve For Valve Lift Adjustment
• WM, 157019 Removing And Installing Cylinder Heads
  • Technical Values
  • Installation Position
  • Component Overview
  • Preliminary Work
  • Removing Cylinder Head
    • Removing Cylinder Head (Cylinders 1 - 3)
    • Removing Cylinder Head (Cylinders 4-6)
  • Installing Cylinder Head
    • Installing Cylinder Head (Cylinders 1 -3)
  • Installing Cylinder Head (Cylinders 4-6)
  • Subsequent Work
• WM, 157037 Disassembling And Assembling Cylinder Head
  • Tools
  • Installation Position
  • Preliminary Work
  • Disassembling Cylinder Head
  • Removing Valve-Stem Seal
  • Assembling Cylinder Head
    • Installing Valve-Stem Seals
  • Subsequent Work
• WM, 158219 Remove And Install The Cylinder Head Cover
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Component Overview
    • Component Overview Of Cylinder Head Cover
  • Remove The Cylinder Head Cover
    • Removing Cylinder Head Cover - Cylinder Bank 1 -3
  • Removing Cylinder Head Cover - Cylinder Bank 4-6
  • Install The Cylinder Head Cover
    • Installing Cylinder Head Cover - Cylinder Bank 1 -3
  • Installing Cylinder Head Cover - Cylinder Bank 4-6
  • Subsequent Work