Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance Tolerance |
| Actuator for camshaft control to cylinder head |
Aluminum screw, M6x14-replace screw |
Tightening torque |
5 Nm (3.5 ftlb.) |
+ 0.5 Nm (0.3 ftlb.) |
| Heat protection shield for actuator on outlet side |
M6 screw |
Tightening torque |
10 Nm (7.5 ftlb.) |
|