Preliminary Work
WARNING: This page is about a different variant/trim than selected.
- Remove the engine.
- Remove transmission.
- Support the engine with >
9771 - engine adapter
. >
9771/1 - mountin
g set and >
9771/2 - engine support
on the assembly support.
1001 IN TOOLS FOR REMOVING UNITS AND WORKING ON THE ENGINE ASSEMBLY SUPPORT
- Drain engine oil.
- Remove exhaust system.
- Remove turbocharger.
- Remove ignition coils.
- Remove fuel injectors.
- Remove heat shields
- Remove actuators for camshaft control.
> 153919 REMOVING AND INSTALLING ACTUATOR FOR CAMSHAFT CONTROL