53 - Body Rear - CARRERA (997)
- WM 530555 Replacing Rear Closing Panel (All Models)
- WM 531755 Replacing Side Reinforcement (Frame For Light) (All Models - Up To 2005)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs
- Removing Side Reinforcement (Frame For Light)
- Preparing Connection Areas Of The Body For Installing Side Reinforcement (Frame For Light)
- Fitting Side Reinforcement (Frame For Light) And Preparing For Installation
- Installing Side Reinforcement (Frame For Light)
- Subsequent Work
- WM 531755 Replacing Side Reinforcement (Frame For Light) (All Models - 2006 And Up)
- Tools
- General Warning Notes
- Preliminary Work For Body Repairs
- Removing Side Reinforcement (Frame For Light)
- Preparing Connection Areas Of The Body For Installing Side Reinforcement (Frame For Light)
- Fitting Side Reinforcement (Frame For Light) And Preparing For Installation
- Installing Side Reinforcement (Frame For Light)
- Subsequent Work
- WM 534855 Replacing Rear Side Member (All Models)
- WM 534855 Replacing Rear Side Member (Section) (All Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Removing Rear Side Member (Section)
- Preparing Connection Areas Of The Body For Installing The Rear Side Members (Section)
- Fitting Rear Side Member And Preparing For Installation
- Installing Rear Side Member (Section)
- Subsequent Work
- WM 535019 Removing And Installing Side Section Support (All Models)
- WM 535541 Repairing Side Panel (Lock Peg) (All Models)
- WM 535555 Replacing Side Panel (CABRIO Models)
- WM 535555 Replacing Side Section (Except CABRIO Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs
- Preliminary Work For Body Repairs With Straightening Bench
- Removing Side Section
- Preparing Connection Areas Of The Body For Installation Of The Side Section
- Fitting Side Section And Preparing For Installation
- Installing Side Section
- Subsequent Work
- WM 536155 Replacing Inner Side Section (Except CABRIO Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs With Straightening Bench
- Removing Inner Side Section
- Preparing Connection Areas Of The Body For Installing The Inner Side Sections
- Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
- Preparing Connection Areas Of The Body For Installing Inner Side Sections (Lower Parts)
- Preparing Connection Areas Of The Body For Installing Inner Side Sections (Upper Parts)
- Safety Instructions For Flying Sparks During Grinding And Welding Work
- Fitting Inner Side Section And Preparing For Installation
- Installing Inner Side Section
- Subsequent Work
- Preliminary Work For Body Repairs With Alignment Bench
- WM 536255 Replacing Frame For Light (All Models)
- WM 536855 Replacing Rear Wheel Housing (All Models)
- WM 536919 Removing And Installing Rear Wheel Housing Liner (All Models)