LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - CARRERA (997) >> WM 534855 Replacing Rear Side Member (Section) (All Models) >> Subsequent Work >> Subsequent Work For Body Repairs

Subsequent Work For Body Repairs

  1. Remove vehicle from the straightening bench.
  2. Clean welded joints and sheetmetal flanges with a wire brush.
  3. Prime flange areas with 2K primer.
  4. Restore standard sealing with body sealant. → 5000IN SEAM SEALING
  5. Restore standard undersealing with underbody sealant. → 5000IN UNDERSEALING
  6. Paint repair area and adjacent surfaces, if necessary.
  7. Install removed add-on parts in the repair area.
  8. Apply cavity preservation.
scientia non olet · About LEMON Manuals