LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - CARRERA (997) >> WM 536155 Replacing Inner Side Section (Except CABRIO Models) >> Subsequent Work >> Subsequent Work For Body Repairs

Subsequent Work For Body Repairs

  1. Remove vehicle from straightening bench
  2. Clean spot-welded joints and sheetmetal flanges with a wire brush
  3. Prime flange areas with 2K primer
  4. Restore standard sealing with body sealant → 5000IN SEAM SEALING
  5. Restore standard undersealing with underbody sealant → 5000IN UNDERSEALING
  6. Paint repair area and adjacent surfaces, if necessary
  7. Install any accessories you removed in the repair area
  8. Apply cavity preservation.


  1. Removing vehicle from straightening bench
  2. Cleaning spot-welded joints and sheetmetal flanges with a wire brush
  3. Priming flange areas with 2K primer
  4. Restore standard sealing with body sealant → 5000IN SEAM SEALING
  5. Restore standard undersealing with underbody sealant → 5000IN UNDERSEALING
  6. Painting repair area and adjacent surfaces, if necessary
  7. Install removed add-on parts in the repair area
  8. Apply cavity preservation.
scientia non olet · About LEMON Manuals