LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - CARRERA (997) >> WM 536155 Replacing Inner Side Section (Except CABRIO Models) >> Preparing Connection Areas Of The Body For Installing The Inner Side Sections >> Preparing Connection Areas Of The Body For Installing Inner Side Sections (Upper Parts)

Preparing Connection Areas Of The Body For Installing Inner Side Sections (Upper Parts)

  1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A, B, C, D-  using a hot-air gun or rotary brush. Grind the connecting flanges until bare.
    Fig 1: Cleaning Welding Areas
    G09823476Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Coating spot-weld flange areas with zinc powder paint
    1. 2.1. Coat all spot-weld flange areas with zinc powder paint.


  1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A, B, C, D-  using a hot-air gun or rotary brush. Grind the connecting flanges until bare.
    Fig 1: Cleaning Welding Areas
    G09823524Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Coating spot-weld flange areas with zinc powder paint
    1. 2.1. Coat all spot-weld flange areas with zinc powder paint.
scientia non olet · About LEMON Manuals