Section 1394 (Automatic Transmission - Theory & Operation, & Disassembly & Assembly)
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Theory And Operation
- Transaxle Description
- Identification Tags
- Major Components
- Gear Ratios
- Torque Converter
- Shift Patterns
- Mechanical Components and Functions
- Planetary Gearset
- Input Shaft
- Front Planetary Carrier Hub (Output Hub)
- Final Drive Gearset
- Differential
- Direct (3, 5, R) Clutch
- Overdrive (O/D) (4, 5, 6) Clutch
- Forward (1, 2, 3, 4) Clutch
- Low/Reverse Clutch
- Intermediate (2, 6) Clutch
- Low One-Way Clutch (OWC)
- External sealing
- Bushings, Bearings and Thrust Washer Locations
- Lubrication
- Park
- Hydraulic System
- Hydraulic Circuits
- Hydraulic Circuit Identification and Function
- Line Pressure Hydraulic Circuits
- Lubrication Hydraulic Circuits
- Torque Converter Hydraulic Circuits
- Solenoid Hydraulic Circuits
- Forward Clutch Hydraulic Circuits
- Direct (3, 5, R) Clutch Hydraulic Circuits
- Intermediate (2, 6) Clutch Hydraulic Circuits
- Low/Reverse Clutch Hydraulic Circuits
- Overdrive Clutch Hydraulic Circuits
- Transaxle Electronic Control System
- Electronic System Description
- Electronic Ignition (EI)
- Accelerator Pedal Position (APP)
- Throttle Position (TP) Sensor
- Pcm
- Transmission Range (TR) Sensor
- Brake Pedal Position (BPP) Switch
- Turbine Shaft Speed (TSS) Sensor
- Output Shaft Speed (OSS) Sensor
- Solenoid Body
- Shift Solenoid A (SSA), Shift Solenoid B (SSB), Shift Solenoid C (SSC), Shift Solenoid D (SSD) and Shift Solenoid E (SSE)
- Transmission Fluid Temperature (TFT) Sensor
- Line Pressure Control (LPC) Solenoid
- Torque Converter Clutch (TCC) Solenoid
- Mass Air Flow (MAF) Sensor
- Intake Air Temperature (IAT) Sensor
- A/C Clutch
- Cylinder Head Temperature (CHT) Sensor
- Transaxle Operation
- Transaxle Operation Overview
- Park Position
- Reverse Position
- Neutral Position
- 1st Gear Above 5 km/h (3 mph)
- 2nd Gear
- 3rd Gear Torque Converter Clutch (TCC) Released
- 3rd Gear TCC Applied
- 4th Gear Torque Converter Clutch (TCC) Released
- 4th Gear Torque Converter Clutch (TCC) Applied
- 5th Gear Torque Converter Clutch (TCC) Released
- 5th Gear Torque Converter Clutch (TCC) Applied
- 6th Gear Torque Converter Clutch (TCC) Released
- 6th Gear Torque Converter Clutch (TCC) Applied
- Manual LOW Position and 1st Gear Below 5 km/h (3 mph)
- Disassembly
- Disassembly And Assembly Of Subassemblies
- Assembly