Torque Specifications Table
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS TABLE
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Cover assembly-to-transaxle case boltsa | - | - | - |
| Differential carrier baffle bolts | 12 | - | 106 |
| Fluid filler tube nut | 11 | - | 97 |
| Fluid reservoir bolts | 12 | - | 106 |
| Fluid pump-to-torque converter housing bolts | 12 | - | 106 |
| Line pressure tap plug | 9 | - | 80 |
| Main control cover boltsa | - | - | - |
| Manual lever nut | 18 | - | 159 |
| Output Shaft Speed (OSS) sensor bolt | 12 | - | 106 |
| Park pawl retainer bolts | 12 | - | 106 |
| Shim gauge bolts | 24 | 18 | - |
| Solenoid body boltsa | - | - | - |
| Stator support feed tube bolts (hex head) | 12 | - | 106 |
| Stator support feed tube bolts (Torx head) | 7 | - | 62 |
| Stator support-to-torque converter housing boltsa | - | - | - |
| Torque converter housing-to-transaxle case boltsa | - | - | - |
| Transmission fluid drain plug | 9 | - | 80 |
| Turbine Shaft Speed (TSS) sensor bolt | 12 | - | 106 |
| Valve body assembly bolts | 12 | - | 106 |
| Valve body-to-case boltsa | - | - | - |
a Refer to the procedure in this article.