LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1394 (Automatic Transmission - Theory & Operation, & Disassembly & Assembly) >> Disassembly And Assembly Of Subassemblies >> Pump Chain and Sprocket

Pump Chain and Sprocket

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean and inspect the pump chain and sprocket assembly for damage or wear and install new components as necessary.
    • Check the drive chain for wear, damage, stretching or tightness of the chain links.
    • Check the chain sprockets for excessive wear in the chain contact areas and thrust washer areas.
    2. Fig 1: Identifying Pump Chain and Sprocket
    GF0044132Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals