Section 199 (2.8L & 3.2L - Generic Scan Tool, Engine Code(S): AFP, BDF, BJS [A4 Platform] (20 Fuel Supply - 26 Exhaust System, Emission Controls))
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen R32, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- 20 Fuel Supply
- Fuel supply system components, removing and installing
- Fuel supply system components, removing and installing
- Fuel tank with attachments and fuel filter (vehicles with engine code AFP and BDF), removing and installing
- Fuel tank with attachments and fuel filter (vehicles with engine code BJS), removing and installing
- Safety precautions when working on fuel supply system
- Rules of cleanliness
- Fuel tank, draining
- Suction jet pumps (vehicles with engine code BJS), removing and installing
- Fuel Pump (FP) unit, removing and installing
- Crash fuel shut-off
- Fuel Pump (FP), checking
- EVAP canister system
- Function of leak diagnostic
- Parts of EVAP canister system (vehicles with engine code AFP), removing and installing
- Parts of EVAP canister system (vehicles with engine code BDF), removing and installing
- Parts of EVAP canister system (vehicles with engine code BJS), removing and installing
- Parts of Leak Detection Pump -LDP- (vehicles with engine code BJS), removing and installing
- Overview plan of EVAP canister system (vehicles with engine code AFP)
- Overview plan of EVAP canister system (vehicles with engine code BDF)
- Evaporative Emission (EVAP) canister system, checking for proper seal
- Evaporative Emission (EVAP) canister purge regulator valve 1, checking
- Evaporative Emission (EVAP) canister purge solenoid valve 2 (vehicles with engine code BJS), checking
- Leak Detection Pump (LDP), checking
- Leak Detection Pump (LDP) and EVAP canister (vehicles with engine code BJS), removing and installing
- EVAP system, checking using KLI 9210 tester
- Electronic Engine Power Control (EPC)
- Fuel supply system components, removing and installing
- 24 Multiport Fuel Injection (MFI)
- Fuel injection, servicing
- General Notes on Fuel Injection
- Overview of Component Locations (vehicles with engine code AFP)
- Overview of Component Locations (vehicles with engine codes BDF and BJS)
- Parts of the fuel injection (vehicles with engine code AFP), removing and installing
- Parts of fuel injection (vehicles with engine codes BDF and BJS), removing and installing
- Intake manifold upper section (vehicles with engine code AFP), disassembling and assembling
- Intake manifold lower section (vehicles with engine code AFP), disassembling and assembling
- Intake manifold (vehicles with engine code BDF), disassembling and assembling
- Intake manifold (vehicles with engine code BJS), disassembling and assembling
- Fuel rail (vehicles with engine code BDF), disassembling and assembling
- Fuel rail (vehicles with engine code BJS), disassembling and assembling
- Air filter (vehicles with engine code AFP), disassembling and assembling
- Air filter (vehicles with engine code BDF), disassembling and assembling
- Air filter (vehicles with engine code BJS), disassembling and assembling
- Safety precautions
- Rules of cleanliness
- Technical data
- Components, checking
- Oxygen sensor heater for oxygen sensors before catalytic converter, checking
- Oxygen sensor heater for oxygen sensors behind Three Way Catalytic Converter (TWC), checking
- Mass Air Flow (MAF) sensor, checking
- Throttle valve control module, checking
- Engine Coolant Temperature (ECT) sensor, checking
- Intake Air Temperature (IAT) sensor, checking
- Intake manifold change-over valve, checking
- Engine speed (RPM) sensor, checking
- Fuel injectors, checking
- Fuel pressure regulator and residual pressure, checking
- Intake system, checking for leaks (false air)
- Function tests
- Engine Control Module (ECM)
- Additional signals, checking
- Fuel injection, servicing
- 26 Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust manifold, front exhaust pipe with Three Way Catalytic Converter (TWC) and attachments (vehicles with engine code AFP)
- Exhaust manifold, front exhaust pipe with Three Way Catalytic Converter (TWC) and attachments (vehicles with engine code BDF)
- Exhaust manifold, front exhaust pipe with double catalytic converter and attachments (vehicles with engine code BJS)
- Muffler with mounts (vehicles with engine codes AFP and BDF)
- Muffler with mounts (vehicles with engine codes BJS)
- Exhaust system (vehicles with engine codes AFP and BDF), aligning
- Three Way Catalytic Converter (TWC), checking
- Exhaust Flap Valve 1 (vehicles with engine code BJS), checking
- Secondary Air Injection (AIR) system
- Secondary Air Injection (AIR) system
- Function
- Parts of Secondary Air Injection (AIR) system (vehicles with engine code AFP), removing and installing
- Parts of Secondary Air Injection (AIR) system (vehicles with engine code BDF), removing and installing
- Parts of Secondary Air Injection (AIR) system (vehicles with engine code BJS), removing and installing
- Secondary Air Injection (AIR) system, checking for proper seal
- Secondary Air Injection (AIR) valve, checking
- Secondary Air Injection (AIR) pump motor, checking
- Combination valve, checking
- Exhaust system components, removing and installing