Parts of EVAP canister system (vehicles with engine code BDF), removing and installing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen R32, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Evaporative Emissions System Components (Vehicles With Engine Code BDF)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Ventilation line

white
Check for secure fitting
To disengage, squeeze together at front
To pressure retaining valve. Refer to Fuel tank with attachments and fuel filter (vehicles with engine code AFP and BDF), removing and installing , item 7

2 - Seal

replace if damaged

3 - Ventilation line

black
Check for secure fitting
to change-over valve. Refer to Fuel tank with attachments and fuel filter (vehicles with engine code AFP and BDF), removing and installing , item 11

4 - Connection piece

5 - Connector

black, 3-pin
for Leak Detection Pump (LDP) -V144-

6 - Vacuum line

to intake manifold. Refer to Overview plan of EVAP canister system (vehicles with engine code BDF) , item 4
Check for secure fitting

7 - Leak Detection Pump (LDP) -V144-*

Under wheel housing liner in rear right wheel housing
checking. Refer to Leak Detection Pump (LDP), checking

8 - Connection hose

Pressure side
Check for secure fitting

9 - 3 Nm

10 - Air filter for diagnostic pump

11 - Connection hose

Intake side
Check for secure fitting

12 - Bracket

13 - 10 Nm

14 - EVAP canister

Under wheel housing liner in rear right wheel housing