Separation point at exhaust pipe

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen R32, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Separation Point On Exhaust Pipe

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Recommended special tools and equipment

Body saw, e.g. V.A.G 1523

Work procedure

Separate exhaust pipe at right angle to separation point (arrow 2).
When installing, position replacement double clamp -4- in installation position at the edge markings (arrows 1 and 3) as shown.

Tightening torque 40 Nm