Installation position of double clamp
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen R32, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Work procedure
- Position new double clamp as shown with approx. 5 mm distance to marking -A- and secure it.
Tightening torque 40 Nm
NOTE:
Marking -A- is valid for vehicles with manual and automatic transmission.