LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Golf GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (2.8L & 3.2L - Generic Scan Tool, Engine Code(S): AFP, BDF, BJS [A4 Platform] (20 Fuel Supply - 26 Exhaust System, Emission Controls)) >> 26 Exhaust system, Emission controls >> Exhaust system components, removing and installing >> Muffler with mounts (vehicles with engine codes BJS) >> Individual components of vacuum control unit

Individual components of vacuum control unit

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen R32, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installed Location Of Vacuum Control Module
GW00000571Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - From check-valve -3- to intake manifold. Refer to Intake manifold (vehicles with engine code BJS), disassembling and assembling  , item 10

2 - From Exhaust Flap Valve 1 -N321- to vacuum actuator. Refer to Muffler with mounts (vehicles with engine codes BJS)  , item 12

3 - Check valve:

White valve side points to vacuum reservoir

Check Exhaust Flap Valve 1 -N321-. Refer to Exhaust Flap Valve 1 (vehicles with engine code BJS), checking  .