Three Way Catalytic Converter (TWC), checking
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen R32, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Function test
- Select the measuring value "Test-ID 01: Catalytic converter" and check whether the specified values are being reached. Refer to Diagnostic mode 6: Check test results of components that are not continuously monitored
- End diagnosis and switch ignition off.
If the specified values are exceeded:
Vehicles with engine codes AFP and BDF
- Replace the front exhaust pipe with catalytic converter:
- Vehicles with engine code AFP. Refer to Exhaust manifold, front exhaust pipe with Three Way Catalytic Converter (TWC) and attachments (vehicles with engine code AFP) , item 10
- Vehicles with engine code BDF. Refer to Exhaust manifold, front exhaust pipe with Three Way Catalytic Converter (TWC) and attachments (vehicles with engine code BDF) , item 14
Vehicles with engine code BJS
- Replace double catalytic converter. Refer to Exhaust manifold, front exhaust pipe with double catalytic converter and attachments (vehicles with engine code BJS) , item 11
Continuation for all vehicles
- Erase DTC memory of Engine Control Module (ECM). Refer to Diagnostic mode 4: Reset/erase diagnostic data
- Generate readiness code. Refer to Readiness code, generating