LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Golf GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (2.8L & 3.2L - Generic Scan Tool, Engine Code(S): AFP, BDF, BJS [A4 Platform] (20 Fuel Supply - 26 Exhaust System, Emission Controls)) >> 26 Exhaust system, Emission controls >> Secondary Air Injection (AIR) system >> Parts of Secondary Air Injection (AIR) system (vehicles with engine code BDF), removing and installing >> Relay position assignment in protective housing (engine compartment, left)

Relay position assignment in protective housing (engine compartment, left)

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen R32, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Position Of Relays In Protective Housing (On Left In Engine Compartment)
GW00000233Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Secondary Air Injection (AIR) Pump Relay -J299-*

2 - Motronic Engine Control Module (ECM) Power Supply Relay -J271-*

NOTE:
  • Disconnect battery Ground (GND) strap beforehand if tools are necessary for removal of relays or control modules from the relay carrier.
  • Obtain radio code for radios with anti-theft coding before disconnecting battery.
  • Check relay activation:

Refer to Electrical Wiring Diagrams, Troubleshooting & Component Locations

scientia non olet · About LEMON Manuals