Section 9 (5X - Body General 9YB)

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

WM, 5X00IN01 Safety Instructions
- Safety Instructions For Raising Vehicles
  - Danger Of Injury When Raising Vehicles
  - Damage When Raising Vehicles
- General Warning Notes
- Safety Instructions For Adhesive Bonding
  - Danger Of Poisoning And Injury When Using Adhesive
  - Safety Instructions For Teromix-6700 Two-Component Adhesive
- Safety Instructions For Assembly Work
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Safety Instructions For Airbag System
- Safety Instructions For Corrosion Protection
  - Safety Instructions For Stopper Location Plan (Body)
WM, 5X00IN02 Protection For Electric Components During Body Repairs
- Information On Electronic Control Units
WM, 5X00IN03 Corrosion Protection Measures During Repair Work
- Measures For Maintaining Long-Term Body Protection
- Prerequisite For Ensuring Validity Of The Long-Life Guarantee
  - Prerequisite For Maintaining The Long-Life Guarantee
    - Porsche long-life guarantee conditions
WM, 5X00IN05 Information On Aluminum Repairs
- Notes
- List Of Materials
- Damage Diagnosis
  - Damage Diagnosis On Aluminum Components
- Repairs
  - Reshaping
  - Removing Dents On Accessories
- Occupational Safety
  - Working On Surfaces
  - Corrosion Protection Measures
WM, 5X00IN07 General Information And Notes On Quality
- Notes
- Battery Trickle Charge
  - Battery Trickle Charging
- Information On Control Units
- Information On Maintaining Long-Life Corrosion Protection Or The Long-Life Guarantee
  - Information On Maintaining Long-Life Corrosion Protection
  - Information On Maintaining The Long-Life Guarantee
WM, 5X00IN08 Bonding Log
WM, 5X00IN10 Welding Aluminum
- Notes
- Welding Aluminum
WM, 5X00IN11 Stud Welding
- Notes
- Preparing For Stud Welding
- Welding Parameters
- Welding Studs
WM, 5X00IN20 Working With Body Structural Foam
- Notes
- General Information
- Structural Foam In Body Building
- Working With Body Structural Foam
WM, 5X00IN21 Working With Body Structural Adhesive Pah.071.781.00
- Notes
- General Information
- Information On Structural Bonding In Vehicle Manufacturing
- Working With Body Structural Adhesive Pah.071.781.00
WM, 5X00IN22 Working With Body Foam Filler
- Notes
- General Information
- Foam Filler In Body Building
- Working With Body Foam Filler
WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints
- Notes
- General Information
- Loosening Joint
- Making Joint
  - Setting Blind Rivets
  - Setting Flow-Form Rivets
WM, 5X00IN24 Setting Self-Tapping Screws
- Notes
- General Information
- Setting Self-Tapping Screws
WM, 5X00IN25 Making Ground Connections
- Notes
- Making Ground Connection Using A Through Bolt
- Making Ground Connection Using A Rivet Nut
WM, 5X00IN26 Replacing Coarse Threaded Bolts
- Notes
- Replacing Coarse Threaded Bolts
- Subsequent Work
WM, 5X00IN29 Replacing Friction Element Welded Joint
- Notes
- General Information
- Loosening Joint
  - Loosening Friction Element Welded Joints (Standard Friction Element)
  - Loosening Friction Element Welded Joints (Countersunk Head Friction Element)
- Making Joint
  - Setting Flow-Form Welding Rivets
WM, 5X00IN33 Thread Repairs For Threaded Bushes With Collar
- Thread Repairs For Threaded Bushes With Collar
WM, 5X00IN34 Thread Repairs For Threaded Bushes Without Collar
- Notes
- Repair Procedure For Threaded Bush Without Collar
WM, 5X00IN40 Technical Values
- Notes
- Technical Values
WM, 5X00IN41 Gap Dimension
- Notes
- Technical Values
WM, 5X00IN43 Underbody Protection
- Notes
- Underbody Protection
WM, 5X00IN44 Cavity Preservation
- Cavity Preservation
WM, 5X00IN45 VEHICLE IDENTIFICATION NUMBEr
- Notes
- Installation Position
- Re-Imprinting New Vehicle Identification Number
  - Information
  - Spacer For Replacing The Vehicle Identification Number
- Encoding The Vehicle Ident. No
  - Encoding vehicle identification number
WM, 5X00IN46 Replacing Identification Plate
- Installation Position
- Replacing Identification Plate
WM, 5X00IN61 Work Sequence For Accident Repairs
- Work Sequence For Accident Repairs
WM, 5X00IN62 Procedure For Damage Diagnosis
- Notes
- Procedure For Damage Diagnosis
- Identifiable Deformations On The Body Structure
- No Identifiable Deformations On The Body Structure
WM, 5X00IN83 Connecting Elements For Body Repairs
- Notes
- Connecting Elements For Body Repairs
WM, 5X00IN Body Parts Of Various Sheet-Steel Strengths
- List Of Materials
- Ultra-High-Strength Steel
- Very-High-Strength Steel
- High-Strength Steel
- Straightening Body Parts
- Separation Points
- Welding Work