Safety Instructions For Grinding Work
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Excessively high dust concentration during grinding work
- Risk of explosion
- Remove any grinding dust using the relevant vacuum cleaner approved for use on the material.
- Remove dust in the work area regularly.
- Do not use compressed air to blow away dust deposits.
- Always separate the dust from different materials (separate aluminum, steel and carbon fibre-reinforced plastic).
- Clean the extraction system at regular intervals.
- Never weld and grind in the same room at the same time.
- Only use pneumatic grinders if possible.