WM, 5X00IN24 Setting Self-Tapping Screws: Notes

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

PARTS DESCRIPTION

Part number	Description	Addition
> 99907391701	Lens-head screw 999.073.917.01 M5x20	M5x20
> 99907354101	Lens-head screw 999.073.541.01 M6x20	M6x20
> PAF00654700	Hexagon-head bolt PAF.006.547.00 M5x20	M5x20
> PAF00709300	Hexagon-head bolt PAF.007.093.00 M5x25	M5x25

TOOLS DESCRIPTION

Tool denomination	Type	Tool number	Image
FDS sockets	Vehicle-specific workshop equipment	> VAS 852 007A	Courtesy of PORSCHE CARS NORTH AMERICA, INC.

TECHNICAL VALUES SPECIFICATION

Location	Description	Type	Basic value	Tolerance 1
Threaded joint		Tightening torque	6 (4.5 ftlb.) Nm	+/- 1 (0.5 ftlb.) Nm
Predrilled hole	Dimension X	Diameter	3.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	7 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Threaded joint		Tightening torque	9.5 (7 ftlb.) Nm	+/- 1 (0.5 ftlb.) Nm
Predrilled hole	Dimension X	Diameter	4.7 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	8 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Screw	Screw in as far as head contact surface	Torque angle	+ 90 °
Pilot bore	Dimension X	Diameter	3.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	7 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Screw	Screw in as far as head contact surface	Torque angle	+ 90 °
Pilot bore	Dimension X	Diameter	3.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	7 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry