51 - Body Center, Roof, Frame - 987-BOXSTER & CAYMAN

WM 510355 Replacing Roof (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R)
- Tools
- Technical Values
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs
- Removing Roof
- Preparing Connection Areas Of The Body For Installation Of The Roof
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of The Body For Installation Of The Roof
- Fitting Roof And Preparing For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Fitting Roof And Preparing For Installation
- Installing Roof
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 510855 Replacing Roof Reinforcement (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
  - Preliminary Work For Body Repairs With Straightening Bench
- Removing Roof Reinforcement
- Preparing Connection Areas Of The Body For Installing The Roof Reinforcement
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of The Body For Installing The Roof Reinforcement
- Preparing Roof Reinforcement For Installation
- Installing Roof Reinforcement
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 510955 Replacing Rear Cross Member (Side Impact Reinforcement) (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
  - Preliminary Work For Body Repairs With Straightening Bench
- Removing Rear Cross Member
- Preparing Connection Areas Of Body For Installing The Rear Cross Member
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of Body For Installing The Rear Cross Member
- Preparing The Rear Cross Member For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Preparing The Rear Cross Member For Installation
- Installing Rear Cross Member
  - Danger Of Injury While Welding
  - Installing Rear Cross Member
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 511155 Replacing Windscreen Frame (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
  - Preliminary Work For Body Repairs With Straightening Bench
- Removing Windscreen Frame
- Preparing Connection Areas Of The Body For Installing The Windscreen Frame
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of The Body For Installing The Windscreen Frame
- Preparing The Windscreen Frame For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Preparing The Windscreen Frame For Installation
- Installing Windscreen Frame
  - Danger Of Injury While Welding
  - Installing Windscreen Frame
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 511155 Replacing Windscreen Frame (All Models)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
  - Preliminary Work For Body Repairs With Straightening Bench
- Removing Windscreen Frame
- Preparing Connection Areas Of The Body For Installing The Windscreen Frame
  - Overview
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
- Preparing The Windscreen Frame For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Preparing Connection Areas Of The Body For Installing The Windscreen Frame
- Installing Windscreen Frame
  - Danger Of Injury While Welding
  - Installing Windscreen Frame
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 513755 Replacing Outer Hinge Pillar (All Models)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
  - Preliminary Work For Body Repairs
- Removing Outer Hinge Pillar
- Preparing Connection Areas Of The Body For Installing Outer Hinge Pillar
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of Body For Installing Outer Hinge Pillar
- Fitting Outer Hinge Pillar And Preparing For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Fitting Outer Hinge Pillar And Preparing For Installation
- Installing Outer Hinge Pillar
  - Danger Of Injury While Welding
  - Installing Outer Hinge Pillar
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 513755 Replacing Outer Hinge Pillar (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- PRELIMINARY WORK FOR BODY REPAIRS WITH ALIGNMENT BENCh
  - Preliminary Work For Body Repairs
- Removing Outer Hinge Pillar
- Preparing Connection Areas Of The Body For Installing Outer Hinge Pillar
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of Body For Installing Outer Hinge Pillar
- Fitting Outer Hinge Pillar And Preparing For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Fitting Outer Hinge Pillar And Preparing For Installation
- Installing Outer Hinge Pillar
  - Danger Of Injury While Welding
  - Installing Outer Hinge Pillar
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 514255 Replacing B-Pillar Reinforcement (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
  - Preliminary Work For Body Repairs With Straightening Bench
- Removing B-Pillar Reinforcement
- Preparing Connection Areas Of Body For Installing B-Pillar Reinforcement
- Preparing Reinforcement For B-Pillar For Installation
- Installing B-Pillar Reinforcement
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 514555 Replacing Outer Lower Side Member (All BOXSTER Models)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs
- Removing Outer Lower Side Member
- Preparing Connection Areas Of Body For Installing Lower Side Member
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of The Body For Installation Of The Outer Lower Side Member
- Fitting In Lower Side Member And Preparing For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Fitting In Lower Side Member And Preparing For Installation
- Installing Outer Lower Side Member
  - Installing Outer Side Member
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 514555 Replacing Outer Lower Side Member (All Models)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs
- Removing Outer Lower Side Member
- Preparing Connection Areas Of The Body For Installing The Outer Lower Side Member
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of The Body For Installation Of The Outer Lower Side Member
- Fitting Outer Lower Side Member And Preparing For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Fitting Outer Lower Side Member And Preparing For Installation
- Installing Outer Lower Side Member
  - Danger Of Injury While Welding
  - Installing Outer Lower Side Member
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 514855 Replacing Centre Side Member (All Models)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Removing Centre Side Member
- Preparing Connection Areas Of Body For Installing Centre Side Member
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of Body For Installing Centre Side Member
- Fitting In Centre Side Member And Preparing For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Fitting In Centre Side Member And Preparing For Installation
- Installing Centre Side Member
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 514955 Replacing Lower Side Member Reinforcement (Support Tube) (All Models)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Removing Lower Side Member Reinforcement
- Preparing Connection Areas Of The Body For Installing Lower Side Member Reinforcement
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Area Of Body For Installing Lower Side Member Reinforcement
- Fitting Lower Side Member Reinforcement And Preparing For Installation
- Installing Lower Side Member Reinforcement
  - Danger Of Injury While Welding
  - Installing Lower Side Member Reinforcement
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 516255 Replacing Hinge Pillar Reinforcement (All Models)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
  - Preliminary Work For Body Repairs With Straightening Bench
- Removing Hinge Pillar Reinforcement
- Preparing Connection Areas Of The Body For Installing Hinge Pillar Reinforcement
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of Body For Installing Hinge Pillar Reinforcement
- Fitting Hinge Pillar Reinforcement And Preparing For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Fitting Hinge Pillar Reinforcement And Preparing For Installation
- Installing Hinge Pillar Reinforcement
  - Danger Of Injury While Welding
  - Installing Hinge Pillar Reinforcement
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 516319 Removing And Installing Deformation Element (All Models)
- Preliminary Work
  - Overview
  - Preliminary work
- Removing Deformation Element
- Installing Deformation Element
- Subsequent Work
WM 516819 Removing And Installing Dashboard Support (All Models)
- Technical Values
- Preliminary Work
- Removing Dashboard Support
  - Notes
  - Replacing Bracket For Dashboard Support
- Installing Dashboard Support
- Subsequent Work
WM 518741 Repairing Threaded Bushes For Seat Cross Member (All Models)
- Tools
- Installing Threaded Bush
  - Installing Repair Threaded Bush For Seat Cross Member
WM 518755 Replacing Seat Cross Member (All Models)
- Tools
- General Warning Notes
  - Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
  - Preliminary Work For Body Repairs
- Removing Seat Cross Member
- Preparing Connection Areas Of The Body For Installing The Seat Cross Member
  - Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
  - Preparing Connection Areas Of Body For Installing Seat Cross Member
- Preparing Seat Cross Member For Installation
  - Safety Instructions For Sharp-Edged Body And Unit Parts
  - Preparing Seat Cross Member For Installation
- Installing Seat Cross Member
  - Danger Of Injury While Welding
  - Installing Seat Cross Member
- Subsequent Work
  - Subsequent Work For Body Repairs
WM 518941 Repairing Threaded Bushes For Suspension SUBFRAME Installation (All Models)
- Tools
- Installing Threaded Bush
  - Installing Repair Threaded Bush
WM 519219 Removing And Installing Cover For Front Underbody (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R)
- Technical Values
- Preliminary Work
- Removing Cover For Front Underbody
- Installing Cover For Front Underbody
- Subsequent Work
WM 519319 Removing And Installing Cover For Centre Underbody (All Models)
- Technical Values
- Preliminary Work
- Removing Cover For Centre Underbody
  - Removing Cover For Side Underbody
  - Removing Cover For Centre Underbody
- Installing Cover For Centre Underbody
  - Notes
  - Installing Cover For Side Underbody
- Subsequent Work
WM 519419 Removing And Installing Cover For Rear Underbody (All Models)
- Technical Values
- Preliminary Work
- Removing Cover For Rear Underbody
  - Notes
  - Removing Support For Underbody Cover
- Installing Cover For Rear Underbody
  - Installing Support For Underbody Cover
  - Installing Underbody Cover
- Subsequent Work