Section 31 (15 - Engine - Cylinder Head, Valve Drive (4.8L Non Turbo) -- 92A - Cayenne (92A))

• WM, 150502 Checking The Timing
  • Information
• WM, 150516 Setting Timing
  • Tools
  • Preliminary Work
  • Tools And Materials
    • Special Tools
  • Information
    • Correct Setting And Possible Errors
  • Setting Timing For Camshafts
  • Subsequent Work
• WM, 150520 Removing And Installing Camshafts
  • Preliminary Work
  • Removing Camshafts
  • Installing Camshafts
  • Subsequent Work
• WM, 150719 Removing And Installing Camshaft Timing Gear
  • Preliminary Work
  • Removing Camshaft Timing Gear
  • Installing Camshaft Timing Gear
  • Subsequent Work
• SY, 1533 Engine Symptom - Loose/Broken Screws And Oil Leaks In The Area Of The Chain Housing Cover And/Or Camshaft Phaser (SY 210/21)
  • Parts
  • Technical Values
    • Notes
    • Parts Required
    • Preparatory Work
    • Problem 1: Loose Or Broken Screws In The Chain Housing Cover Without An Oil Leak
    • Problem 2: Loose Or Broken Screws In The Chain Housing Cover With An Oil Leak
  • Problem 3: Oil Leak In The Area Of The Camshaft Phaser
    • Notes
    • Problem 4: Oil Leak Around The Cylinder Head Cover
    • Problem 5: Oil Leak In The Area Of The Chain Housing Cover, Remedial Action 1, 2, 3 Or 4 Already Performed
• WM, 153319 Removing And Installing Chain Housing Cover
  • Tools
  • Technical Values
  • Preliminary Work
  • Information
    • Component Overview
    • Modification To Chain Housing Cover Seal From Mid-2010
    • Installing Chain Housing Cover
    • Aligning Chain Housing Cover Using A Dial Gauge
  • Removing Chain Housing Cover
  • Securing The Chain Housing Cover
  • Subsequent Work
• WM, 153351 Seal The Chain Housing Cover (Engine Installed)
  • Tools
  • Technical Values
  • Preliminary Work
    • Notes
    • Removing Chain Housing Cover
  • Installing Chain Housing Cover
  • Subsequent Work
• WM, 153519 Removing And Installing Timing Chain
  • Preliminary Work
  • Removing Timing Chain
  • Installing Timing Chain
  • Subsequent Work
• WM, 153619 Removing And Installing Chain TENSIONER
  • Preliminary Work
  • Removing Chain TENSIONER
  • Installing Chain TENSIONER
  • Subsequent Work
• WM, 153719 Removing And Installing Solenoid/Hydraulic Valve For Camshaft Adjuster
  • Tools
  • Preliminary Work
  • Removing Solenoid/Hydraulic Valve For Camshaft Adjuster
  • Installing Solenoid/Hydraulic Valve For Camshaft Adjuster
  • Subsequent Work
• WM, 154719 Removing And Installing Guide And TENSIONING Rails
  • Preliminary Work
    • Notes
    • Removing Guide And Tensioning Rails
    • Installing Guide And Tensioning Rails
  • Subsequent Work
• WM, 155519 Removing And Installing Solenoid/Hydraulic Valve For Valve Lift Switchover
  • Preliminary Work
    • Notes
    • Removing Hydraulic Valve For Valve Lift Switchover
    • Installing Hydraulic Valve For Valve Lift Switchover
  • Subsequent Work
• WM, 155919 Removing And Installing Hydraulic Tappets
  • Preliminary Work
    • Notes
    • Removing Valve Lifters (Hydraulic Tappets)
    • Installing Valve Lifters (Hydraulic Tappets)
  • Subsequent Work
• WM, 156120 Removing And Installing Valves
  • Tools
  • Preliminary Work
  • Information
    • Component Overview
      • Notes
      • Distinguishing Features Of Exhaust Valve On Naturally Aspirated And Turbo Engine
  • Special Tools
    • Tool Overview
    • Valve Dimensions
  • Removing Valves
  • Installing Valves
  • Subsequent Work
• WM, 156355 Replacing Valve Stem Seals
  • Tools
  • Preliminary Work
  • Information
    • Component Overview
      • Notes
      • Distinguishing Feature Of Exhaust Valve On Naturally Aspirated And Turbo Engine
    • Special Tools
    • Valve Dimensions
    • Removing Valve-Stem Seals
  • Installing Valve-Stem Seal
    • Installing New Valve-Stem Seals
  • Subsequent Work
• WM, 157019 Removing And Installing Cylinder Head
  • Preliminary Work
    • Notes
    • Removing Cylinder Head
    • Installing Cylinder Head
  • Subsequent Work
• WM, 158055 Replacing Cylinder Head Cover Gasket
  • Information
• WM, 158219 Removing And Installing Cylinder Head Cover
  • Tools
  • Preliminary Work
  • Tools And Materials
    • Tools
  • Information
    • Component Overview
    • Removing Cylinder Head Cover
    • Installing Cylinder Head Cover
  • Subsequent Work
• WM, 158419 Removing And Installing Camshaft Adjusters
  • Tools
  • Preliminary Work
  • Removing Actuator For Camshaft (Camshaft Controller)
  • Installing Actuator For Camshaft (Camshaft Controller)
  • Subsequent Work