LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (15 - Engine - Cylinder Head, Valve Drive (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 156120 Removing And Installing Valves >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove cylinder head.

    > 157019 REMOVING AND INSTALLING CYLINDER HEAD 

  2. Remove camshafts.

    > 150520 REMOVING AND INSTALLING CAMSHAFTS 

  3. Take hydraulic tappets out of the cylinder head and lay them on a clean surface, arranged according to cylinders and valves. Do not interchange components. For details, see > WM, 155919 REMOVING AND INSTALLING HYDRAULIC TAPPETS .
scientia non olet · About LEMON Manuals