LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (15 - Engine - Cylinder Head, Valve Drive (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 157019 Removing And Installing Cylinder Head >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Fit deflector rail.

    > 154719 REMOVING AND INSTALLING GUIDE AND TENSIONING RAILS 

  2. Install camshafts.

    > 150520 REMOVING AND INSTALLING CAMSHAFTS 

  3. Fit timing chain.

    > WM, 153519 REMOVING AND INSTALLING TIMING CHAIN 

  4. Fit chain housing cover.

    > 153319 REMOVING AND INSTALLING CHAIN HOUSING COVER 

  5. Set the timing.

    > WM, 150516 SETTING TIMING 

  6. Fit fuel distributor pipe.

    > 243019 REMOVING AND INSTALLING FUEL DISTRIBUTOR PIPE

  7. Fit intake-air distributor.

    > 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR

  8. Fit the turbocharger on V8 turbo engines.

    > 213019 REMOVING AND INSTALLING TURBOCHARGER

  9. Take the engine from the assembly support and connect it to the transmission.

    > 100127 REMOVING ENGINE FROM TRANSMISSION AND MOUNTING ENGINE ON TRANSMISSION

  10. Install engine.

    > 100119 REMOVING AND INSTALLING ENGINE

scientia non olet · About LEMON Manuals